Table of Contents
Advertisement
If you experience
any difficulty
with your TV, check these basic remedies
before calling your service technician.
TV will not turn on or controls
don't work
Check to make sure it is plugged
in.
•
Check the wall receptacle
(or extension
cord) to make sure it is "live" by
plugging
in something
else.
•
Try unplugging
set for two minutes,
plugging
it back in, and then
turning
it on again.
Problems
with
remote
Maybe something
is between
the remote and the remote sensor.
•
Maybe the remote
is not aimed directly at the TV's remote sensor.
Maybe batteries
in remote are weak, dead or installed
incorrectly.
Try
replacing
batteries.
•
Remove batteries and hold down one or more buttons for several
seconds. Install the batteries and try remote.
Turns on or off while
playing
Electronic
protection
circuit may have been activated
because of a
power surge, Wait 30 seconds and then turn on again,
If this happens
frequently,
the voltage in your house may be abnormally
high.
Maybe the component
connected
to the input jacks is not turned
on.
•
Maybe the Sleep Timer is active.
"This
program
is blocked"
message
appears on the screen
The V-Chip Parental Controls have been activated.
Follow these steps to
deactivate
them:
1. Press DISPLAY on the remote control to bring up the Enter Password
screen.
2. With the Enter Password screen still up, press the following
buttons
on the remote,
one by one: MUTE, DISPLAY, CLEAR and RESET,
Blank screen or black box appears
on the screen
•
Try another
channel.
Press RESET, in case the picture controls are set too low.
•
Captioning
may be turned
on. Check the Closed-Caption
Display control
panel in the Screen menu.
No sound, picture
okay
•
Maybe sound is muted.
Try pressing volume up button
to restore sound.
No picture,
no sound, but power
is on
Maybe cablelair function
is in wrong position.
Maybe a vacant channel is tuned.
Sound okay, picture
poor
Check antenna connections.
Try adjusting
sharpness function
to improve
weak signals.
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MR27300 and is the answer not in the manual?